Flowserve Circpac HP Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Flowserve Circpac HP. Flowserve Circpac HP User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Installation
Instructions
Circpac HP
Experience In Motion
Segmented Circumferential Gas Seal for Gas Compressors
Vista de pagina 0
1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Instructions

Installation InstructionsCircpac HPExperience In MotionSegmented Circumferential Gas Seal for Gas Compressors

Pagina 2 - 2 Brief Description

21 Precautions 1.1 Please read these instructions carefully. Installation in accordance with the following instructions will contribute to l

Pagina 3 - 3 Equipment Check

3 2.5.3 Minimum runout between the shaft and equipment housing. 2.5.4 Prevention of product sedimentation on the housing, shaft or

Pagina 4 - 4 Seal Installation

3.11 Seal chamber squareness to the shaft center line should be within 0.013 mm per 25.4 mm (0.0005 inch per 1 inch) shaft diameter. Note:

Pagina 5 - 5 Piping and Control System

4.10 Disengage setting plates and store separately. 4.11 Inspect equipment and driver alignment in accordance with coupling and/or equipme

Pagina 6

 5.3 Sizepipingsystemforrequiredowrates.Minimizerestrictionsand  determine total pressure drop(s) through piping system to ensure

Pagina 7 - 8 Repairs and Guarantee

7 Off-SitePerformanceTesting 7.1 Equipment manufacturers will often execute performance tests with   theCircpacHPinstalledonneworretr

Pagina 8 - TO REORDER REFER TO

TO REORDER REFER TOB/M #F.O.To nd your local Flowserve representativeand find out more about Flowserve Corporation, visit www.flowserve.comFIS174eng OR

Comentarios a estos manuales

Sin comentarios