Flowserve ISC1EX Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Flowserve ISC1EX. Flowserve ISC1EX User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Repair Instructions
ISC
Flow Solutions Division
ISC1EX
Single Elastomer Bellows
Vista de pagina 0
1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Repair Instructions

Repair InstructionsISCFlow Solutions DivisionISC1EXSingle Elastomer Bellows

Pagina 2 - 1 Nomenclature

2 DisassemblyWhen disassembling seal, inspect for conditions which may have caused theneed for the seal to be removed from service. If seal was remove

Pagina 3 - Required surface finish

3.2 Gland Assembly 1 (Figure 2)A Mating ring O-ring surface - Inspect for wear,fretting, nicks, scratches, or corrosion.Required surface finish: 6

Pagina 4 - 4 Seal Assembly Instructions

44 Seal Assembly Instructions4.1 Tools Required•3/32", 1/8" hex key wrenches (Sizes < 2.625"); 1/8", 3/16" hex keywrenches

Pagina 5

54.5 Align the two flats on themating ring 3 with the twoflats on the inside of thegland drive ring in thegland assembly, and pressthe mating ring i

Pagina 6 - Centering

64.9 Place the gland/matingring assembly face downover the sleeve/rotary unitassembly. Do not com-press. (Figure 9)4.10 Place the sleeve collar 9onto

Pagina 7 - 5 Static Testing

76 Installation6.1 Refer to the ISC Installation Instructions, FIS120, for proper seal installation. 3 Trademark of Minnesota Mining and Manufacturing

Pagina 8 - TO REORDER REFER TO

TO REORDER REFER TOB/M #F.O.FIS142ORIG 03/01 USAFlowserve Corporation Flow Solutions DivisionPrinted in U.S.A.ISO 9000CertifiedGermanyBrazilMexicoKala

Comentarios a estos manuales

Sin comentarios