Flowserve MX Dashboard Limitorque Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
11
FCD LMENIM2338-01
Torque Setup
Allowed changes: Torque % value from 40-100% [contact
Limitorque before increasing torque values as the actuators
are configured for the desired torque output at the factory].
Position Limit Setup
Note: Encoder values are read only. Precision parameter is
the only allowed change.
Modutronic Setup
Allowed changes: Modutronic Enabled/Disabled, Proportional
Band, Dead Band, Fail Action, Position, Polarity, and Delay After
Stop.
Network Setup Option
Allowed changes: Refer to specific protocol documentation
for detailed information. If a network option is installed, the
appropriate network type will be displayed. Protocols supported:
Profibus DP/PA, DeviceNet, Modbus or Not Installed.
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comentarios a estos manuales

Sin comentarios