Flowserve NRS1-8 Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
12
Tools
n Screwdriver (5.5/100)
Attention
n To provide sufficient ventilation, ensure a minimum spacing of 20 mm between
adjacent units.
Installation
NRS 1-8
On supporting rail (with mounting clip)
1. Clip level switch onto supporting rail.
2. Loosen cover screws
A and unplug cover C from its base B.
3. Select cable entry
E / F and remove corresponding seal.
On mounting panel
1. Loosen cover screws
A and unplug cover C from its base B.
2. Unscrew mounting clip
D.
3. Drill the hole
G marked in the base to 4.3 mm.
4. Fasten base with two screws M4 onto mounting panel.
A Cover screws
B Base
C Cover
D Mounting clip
E Cable entry (flexible)
F Cable entry (housing)
G Hole d = 4.3 mm
H Supporting rail 35 x 15 mm to DIN EN 50022
Key
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios