Flowserve Pac-Seal Type 21 Manual de usuario descargar pdf

Indice de contenidos

Installation InstructionsPac-Seal Type 21 and Type 31 Mechanical Shaft SealTM Experience In Motion

2Description Pac-Seal Types 21 and 31 feature uniquely designed crimped heads and hex-torque drive systems that provide a solid engineered advantage o

Pagina 3 - 1 Equipment Check

3Seal Chamber Requirements Figure 2Sleeve or shaft finish to be1.6 μm (63 μinch) R or betteraShaft or sleeve OD-0.050 mm (-0.002 inch

Pagina 4

1.5 Thoroughly inspect and clean the seal chamber and shaft or pump sleeve. Inspect for corrosion or any defects. Remove all burrs, cuts, dents or de

Pagina 5

52.4 Lubricate inner diameter (ID) of the rotating seal head elastomer bellows with Pac-Ease. Note: For smaller diameter seals it may be easier to l

Pagina 6

63 Type 21 and Type 31 Operational Recommendations 3.1 Remove lock outs on equipment and valves. 3.2 Do not start up the pump dry to check motor

Pagina 7

7

Pagina 8 - TO REORDER REFER TO

TO REORDER REFER TOB/M #F.O.FIS217eng ORG 04/13 Printed in USAflowserve.comTo ﬁnd your local Flowserve representativeand ﬁnd out more about Flowserve

Modelos relacionados Pac-Seal Type 31

Comentarios a estos manuales

Sin comentarios

Flowserve Pac-Seal Type 21 Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Flowserve Pac-Seal Type 21. Flowserve Pac-Seal Type 21 User Manual Manual de usuario

Indice de contenidos

Modelos relacionados Pac-Seal Type 31

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Flowserve Pac-Seal Type 21