Flowserve QX Limitorque Manual de usuario Pagina 69

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 68
69
Limitorque QX Electronic Actuator FCD LMENIM3314-00 – 5/11
flowserve.com
6.6.2 Optional Transformer Remounting
Step 1
Position optional transformer assembly (#1) to the 4 M3 taps on the back of the control module chassis plate, see
Figure 6.16 for orientation. Fit the four M3 screws (#2) thru bracket holes aligning with the taps in on the control
module and using a M2.5 hex key tighten the four M3 screws.
Step 2
Connect wiring (See section 7 for wiring connections). Note that the optional transformer wiring harness (#3) must
have the correct wire to connector position per voltage supply (See Table 7.1).
Vista de pagina 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 81 82

Comentarios a estos manuales

Sin comentarios