Flowserve V901 VariCool Desuperheater Manual de usuario descargar pdf (Pagina 4)

- 4 -

1.4 Physical requirements

• For an optimal operation, the steam speed should be 10 to 100 m/s / 30 to 300 ft/s

• To avoid condensate the set temperature should be 5 to 10 °C / 41 to 50 °F

above the saturated steam temperature.

• Max. operating temperature 530 °C / 986 °F

• Recommended cooling media temperature 120 °C / 248 °F

• Cooling media pressure 5 to 10 bar / 76 to 145 psi (see nozzle table) up to

max. 90 bar / 1300 psi above steam pressure.

• We recommend the installation of a strainer into the cooling media pipe

(mesh size 0,1mm / 0.004 inch)

• Minimum steam pipe diameter 150 mm / 6 inch

• Recommended straight pipe after injection nozzle valve: 0,1 x steam speed

min. 4 to 6 m / 13 to 20 ft

• The distance of the temperature sensor should be 0,2 x steam speed or min. 9 m / 30 ft

• The position of the temperature sensor is important for the measuring quality

Pay attention to the mounting instruction of the sensor supplier

1.5 System requirements

• System drawing with design recommendation Experience shows that deviations result in

considerable problems. A stratification of temperature zones is a frequent phenomenon

in large steam piping networks. We recommend the installation of 2 to 3 temperature

sensors with average value calculation.

1 2 3 4 5 6 7 8 9 ... 15 16

Sin comentarios

Flowserve V901 VariCool Desuperheater Manual de usuario Pagina 4