Flowserve XLC Series Manual de usuario descargar pdf (Pagina 7)

3 Lubrication Instructions

3.1 Beforeinitialstartupthebearingshouldbeoodedwithgreaseuntil 

 greaseisobservedescapingfromthebearing.

3.2 Additionallubrication(vepumpsfromastandardgreasegun)shouldbe 

 addedtothebearingatmonthlyintervalsthroughthelubricationline.

4 Repair Instructions

Thisproductisaprecisionradialloadsupportdevice.Thedesignanddimension

tolerancesarecriticaltoperformance.OnlypartssuppliedbyFlowserveshould

beusedtorepairanXLCbearing.TheseareavailablefromnumerousFlowserve

stockinglocations.Toorderreplacementparts,refertothepartcodenumberand

B/Mnumber.Arepairkitshouldbestockedtoreducerepairtime.

4.1 Five(5)componentsintheXLCBearingaretobereplacedduring 

 servicing:WR-600insert,(2)wiperjackets,and(2)ballandsocket 

 O-rings.Othercomponentsarereusablebutshouldbeinspectedfor 

damage.

4.2 Disassemblyofthebearingisthereverseofassembly.

4.3 TheWR-600insertisheldinplacebyeight(8)screws,four(4)ineach 

 half.Removethesescrewsandseparatethebearinginsertfromthe 

 bearingcarrier.

4.4 Identifythehalfofthenewbearinginsertwiththegreaseportandplaceit

 inthematchingbearingcarrierhalfsotheportsineachpiecearealigned.

 Torquescrewsto1.7N-m(15in-lbs).

4.5 Repeat4.4withthehalvesthatdonotcontainthegreaseport.

4.6 Inspectandresurface/replaceshaftand/orsleevebeforereassembly.

Whenrepairsarenotconductedatthecustomer’slocation,decontaminate the

bearing assemblyandreturnittoFlowserve,withanordermarked“Repair or

Replace.” A signed certicate of decontaminationmustbeattached.A Mate-

rial Safety Data Sheet (MSDS) must be enclosedforanyproductthatcamein

contactwiththebearing.Thebearingassemblywillbeinspectedand,ifrepair-

able,itwillberebuiltandreturnedinitsoriginalcondition.

1 2 3 4 5 6 7 8

Sin comentarios

Flowserve XLC Series Manual de usuario Pagina 7