Flowserve CBR Series Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Flowserve CBR Series. Flowserve CBR Series User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Installation
Instructions
CBR Series
Single Inside Bellows Seal
Experience In Motion
Vista de pagina 0
1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Instructions

Installation InstructionsCBR SeriesSingle Inside Bellows SealExperience In Motion

Pagina 2 - 1 Equipment Check

21 Equipment Check1.1 Follow plant safety regulations prior to equipment disassembly: • lock out motor and valves.

Pagina 3 - 2 Installation

31.7 Check gland pilot and bolt holes to ensure they are adaptable to the equipment and are the same as shown on the assembly drawing.1.8 Handle all

Pagina 4

4Determining the Correct Installed Operating Length Dimension Figure 3Inch Units(Metric Units)R(I1) 18

Pagina 5

52.2 Scribe mark B, Figure 1, at the seal setting point shown on the assembly drawing included with the seal. (This is the seal setting dimension as

Pagina 6 - 3 Vertical Pumps

62.12 Position the gland to the face of the seal housing. Be sure the gland pilot is properly engaged. Tighten the gland stud nuts evenly, cross s

Pagina 7 - 5 Repair

75 RepairThis product is a precision sealing device. The design and dimension tolerances are critical to seal performance. Only parts supplied by Flo

Pagina 8 - TO REORDER REFER TO

flowserve.comTO REORDER REFER TOB/M #F.O.To nd your local Flowserve representativeand nd out more about Flowserve Corporation, visit www.owserve.co

Comentarios a estos manuales

Sin comentarios