Flowserve MT Bevel Gearboxes IOM Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
Limitorque MT Series FCD LMENIM4201-00 – 06/10
20
6.3 Disassembly and Reassembly of MT-4
6.3.1 Disassembly
(Piece numbers refer to Figure 6.4).
1. Remove Thrust Plate (piece #118) followed by Stem Nut (piece #392, two-piece) and Drive Sleeve
(piece #117, 2-piece; piece #394, one-piece) and Roller Bearings (piece #115 and 116).
2. Remove Bevel Cap (piece #94) and withdraw Bevel Pinion/Bearing Subassembly (piece
#95, #103 and #104).
3. Remove Bevel Housing (piece #91) from Thrust Housing (piece #114).
4. Remove Bevel Gear/Torque Drive Sleeve subassembly (piece #93 and 96) and Ball Bearings (piece
#102).
6.3.2 Reassembly
(Piece numbers refer to Figure 6.4).
1. Install Ball Bearings (piece #102) and Bevel Gear/Torque Drive Sleeve subassembly (piece #93 and 96).
2. Attach Bevel Housing (piece #91) to Thrust Base (piece #114).
3. Attach Bevel Cap (piece #94) and Bevel Pinion/Bearing Subassembly (piece#95, #103 and #104).
113
111
395
119
117 393 392 394
120
118
114
106
100
96
93
102
336
115
116
99
95
97
108
107
94
105
121
109
124
104
122
347
105
103
110
91
Two-Piece Stem Nut Design
One-Piece Stem Nut Design
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Comentarios a estos manuales

Sin comentarios