Flowserve MW-200 Series Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Hardware Flowserve MW-200 Series. Flowserve MW-200 Series User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Installation
Instructions
Durametallic
®
MW-200 Series
Liquid Lubricated Dual Cartridge
Canister Seal for Mixers and Agitators
Experience In Motion
Vista de pagina 0
1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Instructions

Installation InstructionsDurametallic® MW-200 SeriesLiquid Lubricated Dual CartridgeCanister Seal for Mixers and AgitatorsExperience In Motion

Pagina 2 - 1 Equipment Check

21 Equipment Check1.1 Follow plant safety regulations prior to equipment disassembly: • Consult the plant Material Safety Data Sheet (MSDS) les for

Pagina 3 - Figure 1

31.10 Pressure testing of this cartridge canister dual seal prior to installation is possible using ltered dry nitrogen or instrument air. Cons

Pagina 4 - 2 MW-200 Seal Installation

42 MW-200 Seal InstallationTools needed: Tools provided: • Lubricant for O-rings and equipment shaft OD. Tools not provided:

Pagina 5 - 4 MW-200 Seal Piping

52.6 Reinstall the shaft coupling and/or drive. Remove any shaft holding or restraining clamps and complete adjustments so that the shaft is in i

Pagina 6 - Plan 54 - Forced Circulation

6Recommended Piping for Dual Liquid Lubricated SealsPlan 53A - Induced Circulation (high shaft speeds)Figure 2Plan 54 - Forced CirculationBufferOutlet

Pagina 7 - 5 Seal Operation

75 Seal OperationTo assure reliable operation of this sealing product, the following operating guidelines should be observed.5.1 Maintain the liquid

Pagina 8 - TO REORDER REFER TO

flowserve.comTO REORDER REFER TOB/M #F.O.To find your local Flowserve representativeand find out more about Flowserve Corporation, visit www.flowserve.com

Comentarios a estos manuales

Sin comentarios