Flowserve MX FOUNDATION Fieldbus Field Unit Manual de usuario Pagina 53
- Pagina / 84
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
53
MX/QX FOUNDATION Fieldbus Field Unit FCD LMENIM2330-01 – 08/11
flowserve.com
Transducer Block Parameters Description
VALVE_TYPE The type of the valve as defined in Fieldbus Transducer Specifications
(FF-903) in Section 4.7 Valve Type. Reference Bulletin LMENIM2306
(MX); LMENIM3306 (QX).
SCALED_VALUES Scaled Information.
Subparameter 0 uint16_var Indicates if APT and ATT configuration are selected. Refer to Bulletin
LMENIM2306 (MX); LMENIM3306 (QX), Installation and Operation
Manual for definitions of APT and ATT.
Subparameter 1 uint16_var APT Output Value. APT is an Analog Position Transmitter representing
valve position (40-20 mA or 0-10 VDC). A Read-only, 16-bit unsigned
value. APT option MUST be enabled for a value to be displayed in
this register. Reports the APT output signal value as configured in
0-100 increments of span. Referenced as terminal points 18 and 17
(common) for mA output.
Subparameter 2 uint16_var ATT Value. ATT is an Analog Torque Transmitter representing actuator
output torque (40-20 mA or 0-10 VDC). A read only 16•bit unsigned
value. ATT option MUST be enabled for a value to be displayed in this
register. Reports the ATT output signal value as configured in 0-100
increments of span. Referenced as terminal points 16 and 1 (common)
for mA output.
DIAGNOSTIC_VALUES Diagnostic Information.
Subparameter 0 uint16_var Unused.
Subparameter 1 uint16_var Measured Voltage on the 3-Phase Power. Diagnostic use only.
Subparameter 2 uint16_var Continuous Position Feedback. read only 16-bit unsigned integer. Scale
is 0-100 increments of open.
VALVE_STATUS Valve Status Information.
Subparameter 0 uint16_var DO_Readback Data Channel – Displays last value request by host.
Bit 00 – S1 or R1 (optional)
Bit 01 – S2 or R2 (optional)
Bit 02 – R3 (optional)
Bit 03 – R4 (optional)
Bit 04 – R5 (optional)
Bit 05 – R6 (optional)
Bit 06 – R7 (optional)
Bit 07 – R8 (optional)
Subparameter 1 uint16_var Valve Status. Read only. Contains most desired indications of field unit
status.
Bit 00 Open – Valve is fully opened. This bit is ORd with bits 01, 02, 03,
04. Value of 1=True, Value of 0=False.
Bit 01 Close – Valve is fully closed. This bit is ORd with bits 00, 02, 03,
04. Value of 1=True, Value of 0=False.
Bit 02 Stopped in Mid-Travel – Valve stopped in mid-travel, and neither
the Open or Closed limit switch is engaged. This bit is ORd with bits 00,
01, 03, 04. Value of 1=True, Value of 0=False.
Bit 03 Opening – Valve is traveling in the Open direction. This bit is ORd
with bits 00, 01, 02, 04. Value of 1=True, Value of 0=False.
- USER INSTRUCTIONS 1
- Contents 2
- Introduction 4
- 1.3 User Safety 5
- 1.4 User Knowledge 5
- System Components 9
- flowserve.com 11
- 2.2.3 Network Host 12
- 2.2.4 Network Cable 13
- 2.3 Other Network Components 14
- 2.5 Fieldbus Power Supply 15
- 2.6.1 Site Preparation 16
- 2.6.4 MX/QX FF Device Setup 22
- 2.6.5 Valve Data 24
- 2.8 Installation Verification 25
- 2.9 Configuration Confirmation 25
- 2.9.2 View Settings 26
- Software 27
- Actuator 28
- Analog Output Block 30
- Discrete Input Block 32
- Function Block 34
- 3.8 Transducer Block 38
- Associated 40
- Documents 40
- How to Order Parts 41
- Appendix A – Wiring 42
- Diagrams 42
- Appendix – Feature 45
- Definitions 45
- Channel 3 – Position Channel 46
- Channel 6 – Actuator Alarms 48
- Channel 9 - Position 49
- Channel 11 – Relay Outputs 50
- Channel 13 – Analog Input 1 50
- Custom Transducer Block (LTB) 50
- Subparameter 1 61
- SOURCE_OF_LIMIGARD 62
- Appendix – 70
- Fieldbus Parameter 70
- Descriptions 70
- Glossary 80
Relacionado con productos y manuales para Hardware Flowserve MX FOUNDATION Fieldbus Field Unit
Hardware Flowserve RT92 Series Manual de usuario
(8 paginas)
(8 paginas)
Hardware Flowserve I90 Series Manual de usuario
(24 paginas)
(24 paginas)
Hardware Flowserve DFC17 Manual de usuario
(28 paginas)
(28 paginas)
Corel LCCDGSX6ML3 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Oprogramowanie graficzne Corel LCCDGSX6ML3.
Dostarczamy 1 pdf podręczników Corel LCCDGSX6ML3 do pobrania za darmo według typów dokumentów: Arkusz Danych
Comentarios a estos manuales