Flowserve NRGS 11-1 Manual de usuario descargar pdf (Pagina 14)

The measuring range can be switch selected between ≥ 0.5 µS/cm and ≥ 10 µS/cm

by means of code switch :

1. Unscrew screws at the electrode terminal, remove cover , Fig. 6

DIP switch 1– 4 OFF Measuring range

≥ 0.5 µS/cm.

DIP switch 1 – 4 ON Measuring range

≥ 10 µS/cm.

2. Replace cover and fasten screws .

Standard setting

Factory setting

The compact system is delivered with the following factory settings:

■

Measuring range ≥ 10 µS/cm

Switch selection of measuring range

Attention

■

Screwdriver for cross head screws, size 1

■

Screwdriver for slotted screws, size 2.5; completely insulated according

to VDE 0680

■

Do not damage the electronic components when setting the code

switch.

Tools

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Flowserve NRGS 11-1 Manual de usuario Pagina 14