search

Flowserve OR 52-7 Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
21
Start, Operation, Alarm and Function Test
Start and operation
1. Apply the supply voltage to the measuring transducer.
The green LED will be illuminated and alarm 2 is signaled.
2. When the equipment is switched on, the system window
appears for approx. 3 seconds, indicating the following:
Name of the equipment,
Certificate,
Serial number,
Number of the software version.
3. After approx 3 seconds the measurement window
appears, indicating the following:
Oil content (in large characters),
State: Warm up
Current time / date in UTC
4. After approx. 30 seconds the actual value in ppm is
indicated in the measurement window. If this value is
below 15 ppm the message Alarm 2 is cancelled and the
equipment state “Ready” is indicated. If, however, the
value continues to exceed 15 ppm, the message Alarm 2
remains active and the equipment state “ppm>Limit” is
indicated.
5. Press now key
+. The purging valve opens and Alarm 2 is
indicated. The equipment state “Clear Water ON” appears.
Rinse the measuring transducer ORG 12 a few minutes
with oil-free water and operate the cleaning device 4
2 – 3 times, Fig. 5. During the rinsing process with oil-free
water the measuring window should show 0 ppm. If this
is not the case switch to programming mode, Parameter
Value Offset, and reduce the zero point by a max. of
5 ppm.
6. To close the purging valve press key
–. The equipment
state “Ready” or “ppm>Limit” will be indicated.
Device
Certif.
Ser.Nr.
Vers.
: ORT7
: IMO
: MEPC.107(49)
: 392358
: 311137.10
Flowserve Gestra
OIL CONTENT :
ppm
State: WarmUp
8
UTC 10:46 2006-12-06
OIL CONTENT :
ppm
State: ready
8
UTC 10:46 2006-12-06
OIL CONTENT :
ppm
State: ClearWater ON
0
UTC 10:46 2006-12-06
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Hardware Flowserve OR 52-7
Hardware Flowserve NRS1-8 Manual de usuario   (20 paginas)
Hardware Flowserve TRV5-40 Manual de usuario   (28 paginas)
Hardware Flowserve FPS 14 Manual de usuario   (11 paginas)
Hardware Flowserve NRG 16-40 Manual de usuario   (28 paginas)
Hardware Flowserve RK Series on-Return Valves Manual de usuario      (2 paginas)
Hardware Flowserve SMK 22 Manual de usuario   (16 paginas)
Hardware Flowserve UNA 23 Manual de usuario   (24 paginas)
Hardware Flowserve BK35A/7 Manual de usuario      (64 paginas)
Hardware Flowserve NRS 2-4 Manual de usuario   (16 paginas)
Hardware Flowserve NRS 2-3 Manual de usuario   (20 paginas)
Hardware Flowserve PRS 9 Manual de usuario   (16 paginas)
Hardware Flowserve NRGS 11-2 Manual de usuario   (20 paginas)
Hardware Flowserve NRGS 11-1 Manual de usuario   (20 paginas)
Hardware Flowserve TRG 5-6x Manual de usuario   (20 paginas)
Hardware Flowserve NRGS 16-4 Manual de usuario   (18 paginas)
Hardware Flowserve SRL63-A Manual de usuario   (18 paginas)
Hardware Flowserve NRS 2-5 Manual de usuario   (14 paginas)
Hardware Flowserve AK 45 Manual de usuario   (16 paginas)
Hardware Flowserve BK 45 Manual de usuario   (16 paginas)
Hardware Flowserve NRS 1-8 Manual de usuario   (20 paginas)
  • Ambir Speedway Start to Finish Architectural Acoustics McCall Elba
  • Canon No Sony Cintas De Datos En Blanco Helio Teléfonos Brookstone No Homelite No
  • Jvc Everio GZ-HD40 Dell 17-3721 Electrolux EW7H438B Sony DPP-EX50 Nissan 2009 Xterra
  • LG 42LS5700 Manual de usuario Electrolux EKK54954OW Manual de usuario Sony DSX-A400BT Manual de usuario Casio ClassPad 330 PLUS Manual de usuario Hotpoint ffa52p Instrucciones de uso