Flowserve Pac-Seal Type 16 Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Flowserve Pac-Seal Type 16. Flowserve Pac-Seal Type 16 User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Installation
Instructions
Pac-Seal Type 16
Mechanical Shaft Seal
TM
Experience In Motion
Vista de pagina 0
1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Instructions

Installation InstructionsPac-Seal Type 16Mechanical Shaft SealTM Experience In Motion

Pagina 2 - Description

2Description The Pac-Seal Type 16 was designed to be the best partially-unitized rotary seal available in the highly competitive market. The Type 16 i

Pagina 3 - 1 Equipment Check

3Seal Chamber Requirements Figure 2Sleeve or shaft finish to be1.6 μm (63 μinch) R or betteraShaft or sleeve OD-0.050 mm (-0

Pagina 4 - 2 Type 16 Installation

1.5 Thoroughly inspect and clean the seal chamber and shaft or pump sleeve. Inspect for corrosion or any defects. Remove all burrs, cuts, dents or de

Pagina 5

52.4 Lubricateinnerdiameter(ID)oftherotatingsealheadelastomerbellows with Pac-Ease. Note: Any oil, Grease, assembly lubricant ngerprints,

Pagina 6

63 Type 16 Operational Recommendations3.1 Remove lock outs on equipment and valves3.2 Do not start up the pump dry to check motor rotation or for

Pagina 8 - TO REORDER REFER TO

TO REORDER REFER TOB/M #F.O.FIS218eng ORG 04/13 Printed in USAflowserve.comTo find your local Flowserve representativeand find out more about Flowserve

Comentarios a estos manuales

Sin comentarios