Flowserve SPECTORcontrol Manual de usuario Pagina 47
- Pagina / 88
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
47
Controller Menu – continued –
Continuous controller
1. Press button in the menu Continuous controller setup.
2. The menu Continuous controller is
password protected. Press button and
enter your password.
3. The name of the controller is highlighted in
yellow. Below that the current actual value,
the setpoint as well as the current control-
ler position are indicated.
4. To change the internal setpoint click in
the green input field.
5. The current value appears in the input
mask. Use the on-screen keyboard to
overwrite or modify the value.
6. When you switch to manual operation you can enter a manipulated variable in the
input field Manual. For this purpose click in the green input field.
7. The current value appears in the input mask. Use the on-screen keyboard to over-
write or modify the value.
8. Use the button to activate either automatic operation, off or manual operation. The
adjusted mode of operation will be indicated by a larger icon next to the button.
9. Use the input fields P (proportional), I (integral) and D (differential) to enter the control
parameters of the PID controller.
10. The current value appears in the input mask. Use the on-screen keyboard to over-
write or modify the value.
11. Below the status indicator Enabled/Disabled and the adjusted controller the actual
value (X), the setpoint (W) and the manipulated variable (Yx) as well as the position
feedback (Yx) are graphically represented in the form of a bar chart.
Continuous
Logo
Controller 1
Actual
Enabled
TEST 2
0.0 %
0.0
0.0NC
0.0
0.0
0.0
0.0
Int. setpoint
Position
Manual:
Note
In this menu only an internal setpoint can be established.
If you change the switch setting from automatic operation to Off, the current
manipulated variable (Yw) of the controller will appear in the field Manual.
If the controller features an external setpoint element that is defective, the
internal setpoint will become active and can be adjusted.
- SPECTORcontrol 1
- Contents 2
- Important Notes 6
- Explanatory Notes 7
- System specification 9
- Installation 10
- Commissioning 11
- Commissioning – continued – 12
- User Interfaces 15
- User Interfaces – continued – 16
- System Menu 22
- System Menu – continued – 23
- Menus of Inputs/Outputs 27
- NRG 26-40 28
- Calibration 30
- NRG 16-42 30
- CAN 1...10 30
- LRG 16-40 31
- Select standard curve 34
- Select temp. coefficient 34
- Current values 35
- Control Equipment 35
- NRS 1-40 35
- NRS 1-41 36
- LRR 1-40 37
- – continued – 38
- Analog 1..10 41
- Output 1 43
- Controller Menu 44
- Controller Menu – continued – 45
- Boiler Menu 62
- Boiler Menu – continued – 63
- Burner Menu 69
- Burner Menu – continued – 70
- Alarm details 82
- Alarm – continued – 83
- List of Equipment 84
- Other equipment 85
- Bus coupler WAGO type 750-347 85
- Feeding WAGO type 750-602 85
- End module WAGO type 750-600 85
- Revision 86
- For your notes 87
- GESTRA AG 88
Relacionado con productos y manuales para Hardware Flowserve SPECTORcontrol
Hardware Flowserve NRGS 16-2 Manual de usuario
(18 paginas)
(18 paginas)
Hardware Flowserve OR 42 Manual de usuario
(12 paginas)
(12 paginas)
Hardware Flowserve NRS 2-40 Manual de usuario
(32 paginas)
(32 paginas)
Hardware Flowserve NRS 1-3b Manual de usuario
(8 paginas)
(8 paginas)
Hardware Flowserve NRS 1-2b Manual de usuario
(6 paginas)
(6 paginas)
Hardware Flowserve UBK 46 Manual de usuario
(20 paginas)
(20 paginas)
Hardware Flowserve MK 20 Manual de usuario
(44 paginas)
(44 paginas)
Hardware Flowserve MK 45 Manual de usuario
(16 paginas)
(16 paginas)
Hardware Flowserve URN 2 Manual de usuario
(12 paginas)
(12 paginas)
Hardware Flowserve NRG 16-42 Manual de usuario
(24 paginas)
(24 paginas)
Hardware Flowserve NRGS 16-1 Manual de usuario
(18 paginas)
(18 paginas)
Hardware Flowserve MK 35/31 Manual de usuario
(36 paginas)
(36 paginas)
Hardware Flowserve NRS 1-42 Manual de usuario
(28 paginas)
(28 paginas)
Hardware Flowserve DK 47L Manual de usuario
(60 paginas)
(60 paginas)
Hardware Flowserve NRZ 2-1 Manual de usuario
(9 paginas)
(9 paginas)
Hardware Flowserve TA 7 Manual de usuario
(8 paginas)
(8 paginas)
Hardware Flowserve URB 1 Manual de usuario
(80 paginas)
(80 paginas)
Hardware Flowserve URA1 Manual de usuario
(4 paginas)
(4 paginas)
Hardware Flowserve BAE-ZKE Manual de usuario
(18 paginas)
(18 paginas)
Toast PondoVac Classic manuali
Manuali dei proprietari e guide per l'utente per Aspirapolvere Toast PondoVac Classic.
We fornisce 1 manuali pdf Toast PondoVac Classic per scaricare gratuitamente in base al tipo di documento: Istruzioni per gli Interventi
Comentarios a estos manuales