Experience In MotionInstallation InstructionsSeal Support ReservoirFlowserve seal support system for dual unpressurized and dual pressurized operation
IntroductionThis manual covers the installation and operation of Flowserve Seal Support Systems for dual unpressurized (API Plan 52/ANSI Plan 7352) an
3Dual Inside Seal with Induced Circulation Through Supply Tank with Cooling Coil Figure 1Plan 53A/ANSI Plan 7353APressure so
API Plan 52/ANSI Plan 7252 for dual unpressurized sealsAn API Plan 52/ANSI Plan 7352 is an unpressurized dual seal system which is used in services w
5Buffer/Barrier Fluid SelectionThe following should be considered when selecting a barrier/buffer uid:• Compatibility of the uid with the process
Fluid volatility and toxicity of the uid must be such that the leakage to the atmosphere or disposal does not impose an environmental problem.1. Th
9. If the system is equipped with a weld pad level gauge the bolts on the cover should be retorqued to 20 ft/lbs. (Tighten in 5 ft/lb increments
FIS123eng REV 11/08 Printed in USAflowserve.comTo find your local Flowserve representativeand find out more about Flowserve Corporation, visit www.flowser
Comentarios a estos manuales