Flowserve LRR1-40 TDS Control Unit Manual de usuario descargar pdf (Pagina 19)

Basic Settings

CAN bus

All devices (level, conductivity) are interconnected via CAN bus. The CANopen protocol

is used for the data exchange between the equipment groups. All devices have an

electronic "address" - the node ID. The four-core bus cable serves as power supply and

data highway for high-speed data exchange.

The CAN address (node ID) can be set between 1 and 123.

The control unit LRR 1-40 has already been configured at our works for operation with

other GESTRA components and can be used straight away without having to set the

nodeID.

If several identical systems are to communicate in a CAN bus network, allocate a different

nodeID for each system.

Please observe the following “Table Node ID“.

NodeID

Should it be necessary to establish other node IDs please take the interdependence of

the equipment into consideration and assign the node IDs for the individual group

components according to the following table:

Reserved LRR 1-40 LRG 16-40 Reserved

X - 1 X X +1 X +2

50 51 Factory setting

reserved area

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Sin comentarios

Flowserve LRR1-40 TDS Control Unit Manual de usuario Pagina 19