Flowserve PMV D3 Digital Positioner Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
21
BASIC MENU
MAN/AUTO
AUT, OK=MAN
POS= 12,3%
OK
MAN, OK=AUT
POS= 12,3%
The menu contents are shown in the
figures on the right and the various texts are
described below:
AUT, OK = MAN
Positioner in automatic mode
MAN, OK = AUT
Positioner in manual mode
In the MAN mode, the value of POS can
be changed using . The push-
buttons increase/decrease the value in steps.
The value can also be changed in the same
way as for the other parameter values, as
described on page 15.
Other functions
C+ can be fully opened by pressing
and then immediately OK simultaneously.
C- can be fully opened by pressing
and OK simultaneously.
C+ and C- can be fully opened for blowing
clean by pressing and OK
simultaneously.
When changing between
MAN and AUT mode, the OK
button must be depressed for 3
seconds.
The Man/Auto menu is used to change between manual and automatic modes.
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Comentarios a estos manuales

Sin comentarios