Flowserve PSS III Seal Durametallic Manual de usuario descargar pdf (Pagina 7)

Repairs

This product is a precision sealing device. The design and dimension tolerances

are critical to seal performance. Only parts supplied by Flowserve should be

used to repair the seal. These parts are available from numerous Flowserve

stocking locations. To order replacement parts, refer to the part code number

and B/M number. A spare back-up seal should be stocked to reduce repair time.

The following parts can also be stocked for emergency needs.

Rotating Face Split Joint Gaskets

Sleeve Gasket Gland Gasket

Rotating Face Gasket Centering Devices

Stationary Face Setting Devices

Seat Gasket Cap Screws

Coil Springs Set Screws

When seals are returned to Flowserve for repair, decontaminate the seal

assembly and include an order marked "Repair or Replace." A signed

certicate of decontamination must be attached. A Material Safety Data

Sheet (MSDS) must be enclosed for any product that came in contact with

the seal. The seal assembly will be inspected and, if repairable, it will be rebuilt,

tested, and returned.

1 2 3 4 5 6 7 8

Sin comentarios

Flowserve PSS III Seal Durametallic Manual de usuario Pagina 7