Flowserve DS Manual de usuario descargar pdf (Pagina 12)

DS USER INSTRUCTIONS ENGLISH 71576283 - 02/13

Page 12 of 36 flowserve.com

2.2.2 Pump masses

PUMP TYPE

PUMP MASS

kg lb

200 DS 401 320 706

200 DS 451 340 750

200 DS 552 470 1036

250 DS 401 340 750

250 DS 452 360 794

250 DS 552 500 1102

300 DS 401 500 1102

300 DS 452 575 1268

300 DS 553 670 1477

350 DS 703 990 2183

350 DS 854 1150 2535

400 DS 553 1010 2227

400 DS 603 1160 2558

400 DS 704 1250 2756

400 DS 855 1550 3417

500 DS 704 1280 2822

600 DS 604 1590 3505

All motors (for masses see the motor

description plate) must be handled with a winch.

2.3 Lifting

2.3.1 Slinging of motor pumps units

Use handling means in accordance with motor

pump unit mass mentioned on the CE plate. For the

masses of the pumps bare end of shaft see table §

2.2.2 and nameplate.

To avoid distortion, the pump unit

should be lifted as shown.

A crane must be used for all pump sets in

excess of 25kg (55 Ib). Fully trained personnel must

carry out lifting, in accordance with local regulations.

Motor pump unit

Bareshaft pump

When handling always wear gloves, safety

boots and an industrial safety helmet.

For masses above 25 kg (55 lb), manual

handling is forbidden.

2.4 Storage

Store the pump in a clean, dry

location away from vibration. Leave piping

connection covers in place to keep dirt and other

foreign material out of pump casing. Turn pump at

intervals to prevent brinelling of the bearings and the

seal faces, if fitted, from sticking.

Do not store pumps starting on the fan guard.

The pump may be stored as above for up to 6

months. Consult Flowserve for preservative actions

when a longer storage period is needed.

2.5 Recycling and end of product life

At the end of the service life of the product or its

parts, the relevant materials and parts should be

recycled or disposed of using an environmentally

acceptable method and local regulations.

If the product contains substances which are harmful

to the environment, these should be removed and

disposed of in accordance with current regulations.

This also includes the liquids and or gases in the

"seal system" or other utilities.

Make sure that hazardous substances or toxic

fluid are disposed of safely and that the correct

personal protective equipment is used. The safety

specifications must be in accordance with the

current regulations at all times.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comentarios a estos manuales

Sin comentarios

Flowserve DS Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Zapatillas Flowserve DS