Flowserve SPECTORcontrol Manual de usuario descargar pdf (Pagina 53)

Controller Menu – continued –

3-position controller setup - continued -

8. Select the signal that indicates the required parameters. For more information on the

setup and configuration of the equipment see menu CAN Input and Analog Input.

9. The green input field Position shows the position indicator. To select a position feed-

back signal click in the green input field. All adjusted signals will be indicated.

10. Select the signal that indicates the required parameters. For more information on the

setup and configuration of the equipment see menu CAN Input and Analog Input.

11. The green input field On and OFF shows the adjusted signal receiver. Click in the

input field to show all established signals.

12. Select the digital output that shall be activated. You will find more information on

equipment setup in the menu Digital Outputs.

13. The green input field Offset shows the current value. To enter or change a value click

in the input field.

14. The adjusted value appears in the input mask. Use the on-screen keyboard to over-

write or modify the value.

15. The green input fields Min/Max limit show the current limit values. To enter or

change a value click in the input field.

16. The adjusted value appears in the input mask. Use the on-screen keyboard to over-

write or modify the value.

17. The green input fields Min. pulse and Valve run time show the current values. To

enter or change a value click in the input field.

18. The adjusted value appears in the input mask. Use the on-screen keyboard to over-

write or modify the value.

19. To configure the controller press button .

Note

The MIN and MAX limit values specify the admissible manipulated variable

range of the controller.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 87 88

Sin comentarios

Flowserve SPECTORcontrol Manual de usuario Pagina 53