Flowserve SPECTORcontrol Manual de usuario descargar pdf (Pagina 61)

Controller Menu – continued –

Intermittent blowdown

1. Press button in the menu Controller.

2. The menu Intermittent blowdown is

password protected. Press button and

enter your password.

3. The yellow input fields Remain. run time

show the currently remaining run times.

Once the break time has elapsed, the

pulse time is started and the intermittent

blowdown valve is motored in the required

position for the adjusted break duration.

4. To set the times press button .

5. When the button Manual (pulse) is

pressed, the intermittent blowdown valve is opened for the adjusted pulse duration.

After that the break time starts again with the parameterised break time.

Intermittent blowdown setup

1. In the menu Intermittent blowdown press button .

2. The green input field Signal assignment

shows the name of the signal output to be

activated. Click in the bottom green input

field to show all established signals.

3. Select the digital output that shall be acti-

vated. You will find more information on

equipment setup in the menu Digital Out-

puts.

4. You can enter data in the input fields

Pulse duration (recommended 2 sec.)

and Break duration. For this purpose

click in the green input field.

5. The current value appears in the input mask. Use the on-screen keyboard to over-

write or modify the value.

Intermittent

blowdown

Logo

Valve status

Manual

Remain. run

time/

Remain. run

time/

sec.

hour

00:00:00

Open

Intermittent

blowdown setup

Logo

Signal assignment

Pulse duration

Break duration

sec.

hour

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 87 88

Comentarios a estos manuales

Sin comentarios

Flowserve SPECTORcontrol Manual de usuario Pagina 61

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Flowserve SPECTORcontrol