Flowserve MX Limitorque Manual de usuario descargar pdf (Pagina 110)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08

102

5.2.4 Control Module Return Options

Please contact factory for return options.

5.2.5 EPROM Care and Replacement

There are four EPROMs in the through hole fabricated MX Control Module. These are located on the

LCS board, on the main processor board, on the Power Board, and on the DDC option board. Under

normal circumstances, these EPROMs should not require replacement. Kits including the EPROMs for

the DDC, Main, and LCD board are available for unit upgrades.

NOTE: DDC firmware and Mainboard firmware must be the same revision level.

The location of the LCS EPROM is shown in Figure 5.4.

Figure 5.4 – LCS Board

$16

Figure 5.5 shows the location of the Main CPU Board EPROMs.

Figure 5.5 – Main CPU Board

&130.

NOTE: Remove and replace tie wrap.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 163 164

Sin comentarios

Flowserve MX Limitorque Manual de usuario Pagina 110