Flowserve MX Limitorque Manual de usuario descargar pdf (Pagina 134)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08

126

STEP 3

Disconnect black, blue and brown wires (L1, L2

and L3) from back of terminal block.

STEP 4

Disconnect the lead seal from the reverser by unplugging the 2-pin and single-pin white connectors.

STEP 5

Disconnect and remove the encoder mounting screws and the encoder.

STEP 6

Remove the mounting screws for the reverser package and remove the reverser by moving the

reverser towards the space previously occupied by the encoder. Discard the used reverser package.

STEP 7

On the new reverser connect the 2-pin and single-pin white connectors to the lead seal.

STEP 8

Connect the black, blue and brown wires (L1,

L2 and L3) to the back of the terminal block.

STEP 9

Install the terminal block with the O-ring and the retaining ring. Install the terminal cover and

screws.

a

CAUTION: While and after installing, keep wires away from cutout. This cutout allows

non-restricting actuation of the reverser plunger.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 163 164

Sin comentarios

Flowserve MX Limitorque Manual de usuario Pagina 134