Flowserve MX Limitorque Manual de usuario descargar pdf (Pagina 82)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08

4.12.3 MX-85, -140, and -150 Optional Drive Sleeve

and Baseplate Removal

First Remove

1. Remove actuator from mounting adapter.

2. Drain oil.

3. Remove thrust base (subassembly #10) - if fitted. (See Section 4.8.1.)

4. Remove motor (subassembly #4). (See Section 4.1.1.)

5. Remove worm shaft (subassembly #3). (See Section 4.10.1.)

6. Remove top-mounted handwheel (#1-8) or side-mounted handwheel (subassembly #16).

(See Section 4.3.1 or 4.4.2.)

7. Remove handwheel adapter (subassembly #12). (See Section 4.14.1.)

8. Remove clutch and clutch ring (subassembly #16). (See Section 4.15.1.)

9. Remove handwheel declutch (subassembly #5). (See Section 4.2.1.)

STEP 1

Lay actuator on its side with the drive sleeve

horizontal. Using a hex key, remove seven of

the baseplate screws (#11-5).

STEP 2

Lay actuator on a table or suitable structure

with one of the screws (#11-5) hanging over

the edge. Remove screw. If needed, rotate

actuator around and remove all other screws.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 163 164

Sin comentarios

Flowserve MX Limitorque Manual de usuario Pagina 82