Flowserve P-200 Durametallic Manual de usuario descargar pdf (Pagina 5)

Install pump backplate

Figure 3

2 P-200 Seal Installation

Tools needed:

• Open-end wrench for gland nuts

 • Allen wrenches provided

 • Silicone lubricant provided

2.1 Lubricate the shaftorsleeveODlightlywiththesiliconelubricant

provided and slide the complete P-200 cartridge seal onto the

shaft, with the end with the setting devices toward the bearing

housing.

2.2 Install pump back plate (sealchamber/stufngbox),Figure3.

Position the P-200 seal gland ush connection, port a in Figure 4,

in the 3 o’clock position fornormalinstallationswithCWrotation

(9o'clockforCCWrotation)foroptimumheatremoval.Alternate

positioning of the gland may be necessary with some pump designs

to permit seal piping to clear the bearing housing. Refer to the

assembly drawing that is supplied with the seal for proper position-

ing. Bolt the back plate in place on the bearing housing.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Flowserve P-200 Durametallic Manual de usuario Pagina 5